Metal Solar Roof L Feet Mount

Functionally, the metal solar roof L feet mount serves as the core link between the photovoltaic bracket and the roof. The horizontal part is fixed to the roof beam body or surface, while the vertical part is connected to the guide rail of the bracket, providing load-bearing support for the photovoltaic panel and ensuring that the module maintains a stable posture in various environments.

Structurally, the L-feet is shaped like an "L"—simple design, but it works really well. The flat part has threaded holes to bolt it down, and the vertical part has spots to connect the rails. Some even come with a hinged water deflector. That little piece stops rain from seeping through the bolt holes, so your roof stays better protected against water.

L foot are usually made of aluminum alloy or stainless steel. The AL6005-T5 aluminum kind is light but strong, so it doesn’t weigh the roof down too much. The SUS304 stainless steel ones are really good at fighting rust—perfect for places that are super humid or near the coast. Either way, they last a long time.

It’s got two big pluses: easy to install and super adaptable. The modular design makes setup quick—saves on labor and time. It works with all sorts of panel setups, whether they’re lined up horizontally or vertically. And it can handle strong winds and heavy snow, so the solar system runs reliably for years.

advantage

1.Structural tweaks: The horizontal part’s thicker, with a non-slip design—makes it 30% sturdier. That one-of-a-kind adjustable water deflector, with a silicone pad, keeps leaks super rare—less than 0.1% chance.

2.Easy to install:The Metal Solar Roof L feet Mount is modular, plus there are pre-drilled holes in different sizes—cuts installation time by 40%. Switching between horizontal and vertical rows? No extra parts needed.

3.Service Advantage: Our metal solar roof L feet mount comes with a 12-year extended warranty. We offer 24/7 technical support, and after-sales inquiries are responded to within one day. Furthermore, the price is 10% lower than other products of similar quality.

Installation Instructions

1.Positioning and drilling: According to the installation position marked on the roof structure, drill holes at the beam body or fixed points to ensure that the hole positions are vertical.

2.Fixed horizontal section: Align the horizontal part of the L foot with the installation surface, tighten it with bolts passing through the through holes, and install waterproof gaskets to prevent leakage.

3.Connect the guide rail: Align the photovoltaic support guide rail with the reserved hole on the vertical section of the L feet solar, tighten it with screws, and adjust the levelness.

4.Waterproof inspection: If a water barrier is worn, rotate it to the fitting position. Check whether the seals at all bolts are intact and complete the installation.