Solar Kliplok For 406 Metal Roof

This solar kliplok for 406 metal roof is made up of several key components. There's the main clamp structure, which gives solid support. Then there are rubber gaskets that work as a soft buffer. Also, there are hexagon socket head cap screws M8×25, washers M8, spring washers M8, and hexagon nuts M8—these little parts make sure all the pieces are locked tight together. Each part has its own job, and when they’re all together, they form a reliable unit.

The main job of this solar rail - less roof clamp is to hold solar panels securely in place. The clamps and side shells offer the main support, so the panels won't wobble or fall. The rubber gaskets—they’re 80×100×2.0 in size—add a cushion. They keep the panels from getting scratched and soak up any shocks. And the screws, washers, spring washers, and nuts hold everything tight, so the panels stay right where they should be even when the weather gets rough.

Why Choose It

First, installing it is super easy. You don't need any fancy tools or complicated steps. This saves a lot of construction time, cuts labor costs, and speeds up solar projects. Second, it's made with high-quality materials.It doesn’t rust and is really durable — that means it can go on for ages without wearing out, so you won’t have to stress about replacing it all the time.

Installation

Start by positioning the kliplok solar mount at the right spot on the roof. Then, grab the hexagon socket head cap screws (M8×25), washers (M8), spring washers (M8), and hexagon nuts (M8) to lock it in place. Make sure you tighten ’em good so the fixture stays steady. After that, set the solar panel on top of the fixture and use the clamps to hold it down tight. Double - check that everything’s lined up right and nice and secure—so the panel doesn’t move at all.